25N025R08
25W Continuous program power
140-20KHz Frequency range
25.5mm Voice coil
86db Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
2.5 inch
-
8 ohm
-
50 watts
-
25 watts
-
86 dB
-
140-20 KHz
-
52 mm
-
6.1 ohm
-
25.5 mm
-
1-PSVCAW
-
8.2 mm
-
2
-
Out
-
5
-
24.5*5/22*5 mm
- Fs
140 Hz
- Rte
6.1 ohm
- Qms
7.852
- Qes
0.527
- Qts
0.494
- BL
4.954 T-m
- Mms
2.42 g
- Vas
0.356 liters
- Sd
22.06 m²
- Xmax
1.6 mm
- Eff
0.187%
-
70*70 mm
-
75 mm
-
4.5 mm
-
65 mm
-
46.5 mm
-
0.185 kg
-
11 kg(48PCS/CTN)
-
332*332*195 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message