05P038C11
50W Continuous program power
122-8KHz Frequency range
38.5mm Voice coil
90dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
5.25 inch
-
8 ohm
-
100 watts
-
50 watts
-
90 dB
-
122-8 KHz
-
109 mm
-
6.4 ohm
-
38.5 mm
-
CCAW
-
14.6 mm
-
2
-
Out
-
6
-
110*20 mm
- Fs
122 Hz
- Rte
6.4 ohm
- Qms
4.21
- Qes
0.651
- Qts
0.564
- BL
8.76 T-m
- Mms
9.87 g
- Vas
2.18 liters
- Sd
95.03 m²
- Xmax
4.3 mm
- Eff
1.01%
-
135*135 mm
-
142 mm
-
5.4 mm
-
121 mm
-
78.5 mm
-
1.85 kg
-
15.8 kg(8PCS/CTN)
-
300*295*210 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message