05N038C01
40W Continuous program power
106-12KHz Frequency range
38.5mm Voice coil
94dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
5.25 inch
-
8 ohm
-
80 watts
-
40 watts
-
94 dB
-
106-12 KHz
-
109 mm
-
5.6 ohm
-
38.5 mm
-
CCAW
-
9.7 mm
-
2
-
Out
-
6
-
37.5*8 mm/37.5*5 mm
- Fs
106 Hz
- Rte
5.6 ohm
- Qms
1.61
- Qes
0.35
- Qts
0.31
- BL
9.67 T-m
- Mms
9.08 g
- Vas
3.33 liters
- Sd
95.03 m²
- Xmax
1.9 mm
- Eff
1.01%
-
132*132 mm
-
136.5 mm
-
5 mm
-
119.0 mm
-
71.50 mm
-
0.51 kg
-
13.7 kg(24PCS/CTN)
-
594*449*169 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message