05CX038R06S
100W Continuous program power
85-20KHz Frequency range
38.5mm Voice coil
89dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
LF unit | HF unit | |
---|---|---|
Nominal Diameter | 5 inch | 1 inch |
Nominal Impedance | 8 ohm | 8 ohm |
Program Power | 200 watts | 40 watts |
Power Handling | 100 watts | 20 watts |
Sensitivity | 89 dB | 98 dB |
Frequency Range | 85-20 KHz | 1.8K-20 KHz |
Effective Diaphragm Diameter | 110 mm | 30 mm |
Minimum Impedance | 6.4 ohm | 7.1 ohm |
Voice-coil Diameter | 38.5 mm | 25.4 mm |
Voice-coil Material | 1-PSVCAW | CCAW |
Voice-coil Winding Depth | 14.6 mm | 1.8 mm |
Numbers of layer(s) | 2 | 2 |
Kind of layer | Out | Out |
Top Plate Thickness | 6 | 2 |
Magnet Size | 110*20 mm | 24.5*3.5 mm |
- Fs
85 Hz
- Rte
6.4 ohm
- Qms
17.21
- Qes
0.539
- Qts
0.523
- BL
8.39 T-m
- Mms
10.46 g
- Vas
3.56 liters
- Sd
86.59 m²
- Xmax
4.3 mm
- Eff
0.389%
-
135 mm
-
142.0 mm
-
5.4 mm
-
121.0 mm
-
103.50 mm
-
2.0 kg
-
4.5 kg(2PCS/CTN)
-
290*155*150 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message