04F025R06-16
20W Continuous program power
75-12KHz Frequency range
25.5mm Voice coil
87dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
4.5 inch
-
16 ohm
-
40 watts
-
20 watts
-
87 dB
-
75-12 KHz
-
95 mm
-
11.5 ohm
-
25.5 mm
-
1-PEPSW
-
13.0 mm
-
2
-
Out
-
5
-
90*15 mm
- Fs
75 Hz
- Rte
11.5 ohm
- Qms
2.75
- Qes
0.72
- Qts
0.571
- BL
7.81 T-m
- Mms
7.62 g
- Vas
3.74 liters
- Sd
66.48 m²
- Xmax
4.0 mm
- Eff
0.206%
-
113.5*113.5 mm
-
128.60 mm
-
5.10 mm
-
103.50 mm
-
58.50 mm
-
0.940 kg
-
36.50 kg(16PCS/CTN)
-
460*265*172 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message