03F020R05-2
20W Continuous program power
125-15KHz Frequency range
20.4mm Voice coil
86dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
3 inch
-
8 ohm
-
40 watts
-
20 watts
-
86 dB
-
125-15 KHz
-
65 mm
-
6.4 ohm
-
20.4 mm
-
1-PEPSCCAW
-
6.3 mm
-
2
-
Out
-
4
-
70*15 mm
- Fs
125 Hz
- Rte
6.4 ohm
- Qms
7.05
- Qes
0.937
- Qts
0.827
- BL
3.588 T-m
- Mms
2.452 g
- Vas
1.072 liters
- Sd
33.18 m²
- Xmax
1.2 mm
- Eff
0.165%
-
82.5*82.5 mm
-
85 mm
-
5.0 mm
-
68 mm
-
50.0 mm
-
0.510 kg
-
20.1 kg(36PCS/CTN)
-
400*317*235 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message