02N020R09
10W Continuous program power
160-13KHz Frequency range
20.4mm Voice coil
77db Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
2 inch
-
4 ohm
-
10 watts
-
5 watts
-
77 dB
-
160-12 KHz
-
32 mm
-
3.8 ohm
-
20.4 mm
-
-
mm
-
2
-
Out
-
-
mm(Nd-Fe-b)
- Fs
160 Hz
- Rte
3.82 ohm
- Qms
7.82
- Qes
0.547
- Qts
0.512
- BL
3.63 T-m
- Mms
1.93 g
- Vas
0.513 liters
- Sd
8.04 m²
- Xmax
mm
- Eff
0.033%
-
50*50 mm
-
55 mm
-
3.0 mm
-
40 mm
-
29.5 mm
-
0.066 kg
-
6.6 kg (100PCS/CTN)
-
352*352*230 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message