03N020C02
30W Continuous program power
210-15KHz Frequency range
20.4mm Voice coil
86db Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
3 inch
-
4 ohm
-
30 watts
-
20 watts
-
86 dB
-
210-15 KHz
-
55 mm
-
3.2 ohm
-
20.4 mm
-
1-PSVCAW
-
5.0 mm
-
2
-
Out
-
3
-
19.5*6/15.5*5 mm
- Fs
210 Hz
- Rte
3.2 ohm
- Qms
5.93
- Qes
0.922
- Qts
0.798
- BL
3.04 T-m
- Mms
1.95 g
- Vas
0.236 liters
- Sd
23.76 m²
- Xmax
1.0 mm
- Eff
0.226%
-
70.5*70.5 mm
-
78.7 mm
-
4.20 mm
-
62 mm
-
42.5 mm
-
0.107 kg
-
5.0 kg(36PCS/CTN)
-
385*292*220 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message