03F020R17
30W Continuous program power
110-15KHz Frequency range
20.4mm Voice coil
88db Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
2 inch
-
4 ohm
-
30 watts
-
15 watts
-
88 dB
-
110-15 KHz
-
62 mm
-
3.6 ohm
-
20.4 mm
-
-
mm
-
2
-
Out
-
-
mm(Y30)
- Fs
110 Hz
- Rte
3.64 ohm
- Qms
6.88
- Qes
0.568
- Qts
0.524
- BL
3.91 T-m
- Mms
3.44 g
- Vas
0.78 liters
- Sd
30.19 m²
- Xmax
4.0 mm
- Eff
0.177%
-
80*80 mm
-
84 mm
-
4.0 mm
-
71 mm
-
46 mm
-
0.366 kg
-
15.2 kg(36PCS/CTN)
-
400*317*235 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message