03N020R01
40W Continuous program power
217-15KHz Frequency range
20.4mm Voice coil
89db Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
3 inch
-
8 ohm
-
40 watts
-
20 watts
-
89 dB
-
217-15 KHz
-
65 mm
-
6.4 ohm
-
20.4 mm
-
1-PEPSCCAW
-
6.3 mm
-
2
-
Out
-
4
-
50*4 mm
- Fs
217 Hz
- Rte
6.4 ohm
- Qms
2.812
- Qes
0.843
- Qts
0.649
- BL
4.679 T-m
- Mms
2.148 g
- Vas
0.387 liters
- Sd
33.18 m²
- Xmax
1.2 mm
- Eff
0.456%
-
82.5*82.5 mm
-
86 mm
-
5.0 mm
-
68 mm
-
44 mm
-
0.215 kg
-
19.5 kg(36PCS/CTN)
-
385*292*220 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message