02N025C09
40W Continuous program power
400-10KHZ Frequency range
25.5mm Voice coil
87db Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
2 inch
-
4 ohm
-
40 watts
-
20 watts
-
87 dB
-
400-10 KHz
-
50 mm
-
3.2 ohm
-
25.5 mm
-
/
-
mm
-
/
-
/
-
/
-
mm
- Fs
400 Hz
- Rte
3.2 ohm
- Qms
11.57
- Qes
1.403
- Qts
1.25
- BL
2.84 T-m
- Mms
1.50 g
- Vas
0.05 liters
- Sd
19.63 m²
- Xmax
mm
- Eff
0.24%
-
58 mm
-
63.2 mm
-
3.2 mm
-
50 mm
-
33 mm
-
0.098 kg
-
11.5 kg(100PCS/CTN)
-
352*352*230 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message