12N075C13
300W Continuous program power
47-4.0KHz Frequency range
75.5mm Voice coil
96dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
12 inch
-
8 ohm
-
600 watts
-
300 watts
-
96 dB
-
47-4.0 KHz
-
260 mm
-
5.2 ohm
-
75.5 mm
-
PHT-IIALW
-
19.0 mm
-
2
-
Out
-
12.0
-
74*10 mm
- Fs
47 Hz
- Rte
5.2 ohm
- Qms
4.139
- Qes
0.440
- Qts
0.397
- BL
15.70 T-m
- Mms
67.93 g
- Vas
66.68 liters
- Sd
530.93 m²
- Xmax
5.0 mm
- Eff
1.53%
-
315 mm
-
298 mm
-
6.4 mm
-
289 mm
-
148 mm
-
4.5 kg
-
5.3 kg(1PCS/CTN)
-
337*337*180 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message