12F065C21
300W Continuous program power
55-5KHz Frequency range
65.5mm Voice coil
97dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
12 inch
-
8 ohm
-
600 watts
-
300 watts
-
97 dB
-
55-5 KHz
-
260 mm
-
5.6 ohm
-
65.5 mm
-
CU
-
13.4 mm
-
2
-
Out
-
8
-
156*20 mm
- Fs
52 Hz
- Rte
5.6 ohm
- Qms
15.39
- Qes
0.413
- Qts
0.403
- BL
16.97 T-m
- Mms
58.67 g
- Vas
58.40 liters
- Sd
530.93 m²
- Xmax
2.7 mm
- Eff
2.17%
-
311 mm
-
297 mm
-
6.5 mm
-
286 mm
-
142.8 mm
-
4.7 kg
-
6.5 kg(1PCS/CTN)
-
337*337*180 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message