10N065C18
250W Continuous program power
72-6KHz Frequency range
65.5mm Voice coil
96dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
GENERAL SPECIFICATIONS
-
10 inch
-
8 ohm
-
500 watts
-
250 watts
-
96 dB
-
72-6 KHz
-
225 mm
-
5.6 ohm
-
65.5 mm
-
PHT-IIALW
-
16.0 mm
-
2
-
Out
-
9
-
64*10 mm
THIELE-SMALL PARAMETERS
- Fs
72 Hz
- Rte
5.6 ohm
- Qms
8.635
- Qes
0.562
- Qts
0.528
- BL
13.03 T-m
- Mms
38.17 g
- Vas
28.87 liters
- Sd
397.61 m²
- Xmax
5.0 mm
- Eff
1.82%
MOUNTING & SHIPPING NFORMATION
-
261.5 mm
-
244 mm
-
6.5 mm
-
234.50 mm
-
122.50 mm
-
3.2 kg
-
4.05 kg(1PCS/CTN)
-
284*284*148 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
-
FREQUENCY RESPONSE
-
DIMENSIONS
Get a quote
leave a message