10F065C23
250W Continuous program power
63-5KHz Frequency range
65.5mm Voice coil
96dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
GENERAL SPECIFICATIONS
-
10 inch
-
8 ohm
-
500 watts
-
250 watts
-
96 dB
-
63-5 KHz
-
213 mm
-
5.2 ohm
-
65.5 mm
-
CU
-
11.1 mm
-
2
-
Out
-
6
-
156*20 mm
THIELE-SMALL PARAMETERS
- Fs
63 Hz
- Rte
5.7 ohm
- Qms
17.78
- Qes
0.423
- Qts
0.413
- BL
14.99 T-m
- Mms
43.15 g
- Vas
25.12 liters
- Sd
346.36 m²
- Xmax
2.6 mm
- Eff
1.42%
MOUNTING & SHIPPING NFORMATION
-
259 mm
-
248.2 mm
-
5.6 mm
-
230.50 mm
-
115.3 mm
-
4.0 kg
-
6.0 kg(1PCS/CTN)
-
285*285*150 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
-
FREQUENCY RESPONSE
-
DIMENSIONS
Get a quote
leave a message