08P050C21
100W Continuous program power
70-6KHz Frequency range
49.5mm Voice coil
95dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
GENERAL SPECIFICATIONS
-
8 inch
-
8 ohm
-
200 watts
-
100 watts
-
95 dB
-
70-6 KHz
-
165 mm
-
5.6 ohm
-
49.5 mm
-
COPPER
-
14.3 mm
-
2
-
Out
-
8
-
140*20 mm
THIELE-SMALL PARAMETERS
- Fs
70 Hz
- Rte
5.6 ohm
- Qms
8.265
- Qes
0.292
- Qts
0.282
- BL
14.78 T-m
- Mms
24.55 g
- Vas
13.34 liters
- Sd
213.82 m²
- Xmax
5.2 mm
- Eff
1.55%
MOUNTING & SHIPPING NFORMATION
-
210 mm
-
196 mm
-
5.4 mm
-
185.5 mm
-
112.5 mm
-
3.75 kg
-
4.20 kg(1PCS/CTN)
-
227*227*128 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
-
FREQUENCY RESPONSE
-
DIMENSIONS
Get a quote
leave a message