06P038C14
50W Continuous program power
91-9KHz Frequency range
38.5mm Voice coil
92dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
6.5 inch
-
8 ohm
-
100 watts
-
50 watts
-
92 dB
-
91-9 KHz
-
136 mm
-
6.4 ohm
-
38.5 mm
-
CCAW
-
14.6 mm
-
2
-
Out
-
6
-
120*20 mm
- Fs
91 Hz
- Rte
6.4 ohm
- Qms
6.41
- Qes
0.661
- Qts
0.600
- BL
8.71 T-m
- Mms
12.91 g
- Vas
6.75 liters
- Sd
143.14 m²
- Xmax
4.3 mm
- Eff
0.75%
-
161.5 mm
-
172.0 mm
-
5.5 mm
-
145.6 mm
-
83.0 mm
-
2.15 kg
-
18.20 kg(8PCS/CTN)
-
380*335*220 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message