06F050R01
100W Continuous program power
52-6KHz Frequency range
49.55mm Voice coil
85dB Sensitivity
Optimized magnet and FEA analyse
Technical Highlights
-
Excellent material quality
Traceability to national standards, accurate and reliable testing results
-
Strong three-dimensional sense
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
-
Advanced technology
An amplification system containing UNG enzyme effectively avoids contamination caused by PCR amplification products
-
Strong resolution
Amplification detection can be completed in just 60 minutes, saving about 1/3 of the time compared to other brands of reagents
Parameters
-
6.5 inch
-
4 ohm
-
200 watts
-
100 watts
-
84 dB
-
52-6 KHz
-
138 mm
-
3.47 ohm
-
49.55 mm
-
1-PEPSW
-
24 mm
-
2
-
Out
-
8
-
120*25 mm
- Fs
52 Hz
- Rte
3.47 ohm
- Qms
11.85
- Qes
0.482
- Qts
0.464
- BL
9.58 T-m
- Mms
38.74 g
- Vas
8.04 liters
- Sd
149.57 m²
- Xmax
11.0 mm
- Eff
0.209%
-
159.0 mm
-
164.0 mm
-
5.5 mm
-
145.0 mm
-
91.5 mm
-
2.8 kg
-
24.5 kg(8PCS/CTN)
-
355*320*243 mm
- Program power is defined as 3db greater than AES Power.
- Testd for two hours using a continuous , band-limited pink noise signal as per AES 2-1984Rev . 2003 . Loudspeaker tested in free air.
- From T/S parameters , measured with klippel DA LPM module.
- The Xmax is calculated as : (HVC-HG)/2+Hg/4 . Hvc is the voice coil height and Hg the gap height.
- The Xmech is calculated as : (HVC-HG)/2+(Hg-2) Hvc is the voice coil height and Hg thegap height.
- Thiele-small parameters are measured after preconditioning:
a) at 20° C-22° C. 50 % humidity for 2 hours;
b) by klippel Isi measurement. All specifications subject to shange without notice_c.a.
Get a quote
leave a message